Turn an FM Transmitter into a Micro Pirate Radio

Corporate radio is preprogrammed junk. But don’t curse the DJ; seize the airwaves! With a soldering iron and a cheapo FM transmitter — the kind used to play an iPod through a car radio — you can transform your humble Honda into a Radio Free Civic that can broadcast your tunes up to … 100 feet.
This article is a wiki. Got extra advice? Log in and add it.

Step 1. Pry open the transmitter’s case with a putty knife and remove the internal antenna (often labeled ant).

Step 2. In its place, solder a telescoping antenna or a piece of copper wire — no more than 35 inches long for broadcasting within the standard FM transmission spectrum.

Step 3. The transmitter may have a resistor, typically marked with an r, to limit the power of the signal. Replace it with copper wire to boost the transmission.

Step 4. Slap a bumper sticker on your ride advertising your station’s frequency. You’ll soon build a grateful audience of fellow commuters suffering through that traffic jam.

Contributed by Mathew Honan

http://howto.wired.com/wiki/Turn_an_FM_Transmitter_into_a_Micro_Pirate_Radio

Advertisement

One Response

  1. [...] This post was mentioned on Twitter by testbeta. testbeta said: trying to build a FM transmitter for long range, http://goo.gl/tVVv says there is a resistor that limits the signal strength let's see [...]

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Connecting to %s

Follow

Get every new post delivered to your Inbox.